Configure the Tape Library

Configure the Tape Library

Configure the tape library by using one of the following options:

Enter the following command with no parameters:
cfgmgr
The command automatically configures all devices known to the Atape driver, including any new tape drive devices.
Shut down and reset (reboot) the system to automatically configure and make available any new tape or medium changer devices know to the Atape driver, including tape drive devices.

The Atape device driver also includes a test utility (tapeutil), which allows you to test the library by issuing commands that move cartridges between cells and drives.

For more information about the Atape device driver, see the IBM SCSI Tape Drive Medium Changer, and Library Device Drivers Installation and User's Guide.

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.