Bar Code
In accordance with specification MH1O.8M-1983 of the American National Standard Institute (ANSI),
the bar code must be printed in the area indicated in Figure 29.
The bar code is the industry standard Code 39 ("3 of 9") and can have a label of up to eight
alphanumeric characters (for a list of the characters, see below Figure 31).
Bar code label characters must appear on the label in the following order, from left to right:
Bar codes can be obtained from:
Stevens Labels
4815 Moline Street
Denver, CO 80239
(303) 373-1734
(303) 373-0853 (fax)
The part number for labels with a sequence of 0 through 29 is 1320.0051;
the part number for labels with a unique sequence is 1320.0001.
The quantity for each part number is 30 labels.
Bar Code Element Widths
Figure 30 defines the widths of the bar code elements.
Finure 30. Widths of Flements on the Bar Code
Please see the LEGAL - Trademark notice.
Element
Location
Number in
above
Figure 29Width
Narrow Element
1
0.013 ± 0.004 in. (0.3302 ± 0.1016 mm)
Wide Element
2
0.039 ± 0.004 in. (0.9906 ± 0.1016 mm)
Intercharacter
Gap 3
Between 0.013 ± 0.004 in. (0.3302 ± 0.1016 mm)
and 0.039 ± 0.004 in. (0.9906 ± 0.1016 mm)
Checksum Character
The checksum character is the modulus 43 sum of all the values in the alphanumeric bar code label.
Character values are given in below Figure 31.
Figure 31. Characters and Checksum Values for the Bar Code Label
Label
CharacterValue
Label
CharacterValue
Label
CharacterValue
0
0
F
15
U
30
1
1
G
16
V
31
2
2
H
17
W
32
3
3
I
18
X
33
4
4
J
19
Y
34
5
5
K
20
Z
35
6
6
L
21
'
36
7
7
M
22
37
8
8
N
23
SPACE
38
9
9
O
24
$
39
A
10
P
25
/
40
B
11
Q
26
+
41
C
12
R
27
%
42
D
13
S
28
E
14
T
29
Back to
Feel free - send a for any BUG on this page found - Thank you.