When you have established a connection with the Netfinity Advanced System Management Processor, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the Netfinity Advanced System Management Processor. You can use one of two username and password combinations:
- The default username (USERID) and password (PASSW0RD)
Note: The default username and password is case sensitive. You must use all caps, and the '0' in PASSW0RD, is the numeral zero. - A username and password that you define using the Advanced System Management service and Netfinity Manager
Important:
If you update the Netfinity Advanced System Management Processor microcode,
the default username (USERID) and password (PASSW0RD) are reset.
If applicable, notify the system administrator.
When you have logged into the Netfinity Advanced
System Management Processor, the following main
menu appears:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
The following System Power menu appears:
1 Current Power Status
2 Power Configuration
3 Power On
4 Power Off
- Select 1 Current power Status for information about the current server power status.
- Select 2 Power Configuration for information about the server power configuration.
- Select 3 Power On to power the server on (if it is currently powered off).
- Select 4 Power Off to power the server off (if it is currently powered on).
