Information LED panel

Information LED panel

The information LED panel on the front of the server contains the following status lights.

•  System Power Light: When this green light is on,  system power is present in the server. When this  light flashes, the server is in standby mode (the  system power supply is turned off and ac current is  present). When this light is off, either a power  supply, ac power, or a light has failed.

    -Attention- If this  light is off, it does not mean there is no  electrical current present in the server. The  light might be burned out. To remove all  electrical current from the server, you must  unplug the server power cords from the  electrical outlets.

•  System POST Complete Light: This green light is  on when the power-on self-test (POST) completes without any errors.

•  SCSI Hard Disk Drive Activity Light: This green  light is on when there is activity on a hard disk drive.

•  Processor Activity Lights: These green lights  indicate activity on each of the installed microprocessors.

•  System Error Light: This amber light is on when a  system error occurs. A light on the diagnostics LED  panel will also be on to further isolate the error.  (For more information, see 'Status LEDs'.)

•  Ethernet Transmit/Receive Activity Light: When  this green light is on, there is transmit or receive  activity to or from the server.

•  Ethernet Link Status Light: When this green light  is on, there is an active connection on the Ethernet port.

•  Ethernet Speed 100 Mbps: When this green light  is on, the Ethernet speed is 100 Mbps. When this  light is off, the Ethernet speed is 10 Mbps.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.