Shuttle removal

Shuttle removal

Note: Read Safety Information.

To remove the shuttle, do the following:

1.  If you have not already done so, turn off the server  and peripheral devices and disconnect all external  cables and power cords (see 'Preparing to install options').
2.  Remove the top cover (see Top Cover Removal).
3.  Remove processor support tray (see 'Processor support tray removal').
4.  Disconnect all cables attached to the front of the shuttle.
5.  Remove the shuttle.
    
   
   1.  Loosen the screws 1 on the back of the shuttle;  then, slide the shuttle to the rear of the system.