Disable the Ethernet Card on the Planar


5.1 Disable the Ethernet Card on the Planar


Netfinity 3000 and 3500

  1.  When you see the IBM logo press F1 to enter the Setup Utility.
  2.  From the Setup Utility select Devices and I/O Ports.
  3.  From Devices and I/O Ports select Ethernet Setup.
  4.  Use the left or right arrow to Enable/Disable the Ethernet card.
  5.  Press Esc until you reach the Setup Utility menu.
  6.  Save your settings and exit.


This can also be done by loading the default settings but be aware that all settings will then be set to default.


Netfinity 5000

  1.  When you see the IBM logo press F1 to enter the Setup Utility.
  2.  From the Setup Utility select Advanced Setup.
  3.  From Advanced Setup select PCI Bus Control.
  4.  From PCI Bus Control select PCI Device Enable/Disable.
  5.  Use the left or right arrow to Enable/Disable the Ethernet card.
  6.  Press Esc until you reach the Setup Utility menu.
  7.  Save your settings and exit.


This can also be done by loading the default settings but be aware that all settings will then be set to default.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.