Processor Board/Backplate Removal - Netfinity 5600 - Type 8664

Processor Board/Backplate Removal

Before you begin: Read 'Safety information'.

Note:

1.  The illustrations in this book are similar to the server; details might vary.
2.  To replace the processor board/backplate assembly, reverse this procedure.
    Care should be taken in routing the system board cables when replacing the processor board.

To remove the processor board/backplate assembly, do the following.

1.  Power-off the server and all external devices; then, disconnect the server from the power source.
2.  Remove the server cover. See 'Removing the left-side cover (tower model)' or 'Removing the cover (rack model)'.
    
   
3.  Disconnect the processor board cables.
4.  Release the processor board latch -1-; then, remove the processor board for the server.