Advanced System Management PCI Adqapter 10/100 Mbps Ethernet port

Advanced System Management PCI Adapter 10/100 Mbps Ethernet port:

The Advanced System Management PCI Adapter contains a 10/100 Mbps Ethernet controller.
The Ethernet controller has an external RJ-45 connector that is used with Category 3, 4, or 5 unshielded twisted-pair (UTP) cable.
The connector enables the Advanced System Management PCI Adapter to attach to an Ethernet network for remote communication.

Notes:

1.  The Advanced System Management PCI Adapter 10/100 Mbps Ethernet port cannot be accessed  from the network operating system.
    The connector is dedicated to connecting the Advanced System Management PCI Adapter to  an Ethernet network through a service-processor interface, such as Netfinity Manager.
2.  The 100BASE-TX Fast Ethernet standard requires that the cabling in the network is Category 5 or higher.

Advanced System Management dual serial port:
The Advanced System Management PCI Adapter contains a dual serial port.
The port has an external connector that can be used to attach to a Y-cable that is shipped with the server.
The serial connectors on the Y-cable and the pin-number assignments are the same as for the system serial ports.
This Y-cable can be used to attach to a modem that is dedicated to communication with the Advanced System Management PCI Adapter.

You can obtain a listing of compatible modems and related information by accessing the following address:

http://www.ibm.com/pc/us/compat/ on the World Wide Web.

Advanced System Management Interconnect port: The Advanced System Management PCI Adapter contains an Advanced System Management Interconnect port.
The port has an external connector that must be attached to an optional Y-cable that provides for chaining other compatible service processors for remote access.
To obtain an optional Y-cable, contact an IBM reseller or IBM marketing representative.

The following table shows the pin-number assignments for the connectors used by the Advanced System Management Interconnect bus port.

Table 11. Advanced System Management
Interconnect bus connector pin-number assignments 

Pin	Signal
1	Term power
2	+ Input
3	- Input
4	+ Output
5	- Output
6	Ground

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.