AdapterId 0F5Fh AdapterName "EIZO GC40" NumBytes 2 NamedItem Prompt "Enable/Disable Adapter" Choice " Adapter Enabled " pos[0]=XXXXXXX1b Choice " Adapter Disabled " pos[0]=XXXXXXX0b Help "This controls whether the adapter is enabled or not. Use the Enabled setting for normal use. Use the Disabled setting if you are not using the adapter and enabling it causes a conflict with another device." NamedItem Prompt "Hardware Registers" choice " BC0 to BCF " pos[1]=XX010XXXb io 0BC0h-0BCFh choice " 7C0 to 7CF " pos[1]=XX001XXXb io 07C0h-07CFh choice " FC0 to FCF " pos[1]=XX011XXXb io 0FC0h-0FCFh choice " 13C0 to 13CF " pos[1]=XX100XXXb io 13C0h-13CFh choice " 17C0 to 17CF " pos[1]=XX101XXXb io 17C0h-17CFh choice " 1BC0 to 1BCF " pos[1]=XX110XXXb io 1BC0h-1BCFh choice " 1FC0 to 1FCF " pos[1]=XX111XXXb io 1FC0h-1FCFh Help "Determines the range of i/o addresses used. These include the 34010 host port registers and the command and status registers. The addresses in this range cannot be used by another installed device." NamedItem Prompt "Color Palette addresses" choice " 3C6 to 3C9 " pos[1]=XXXXX000b choice " 7C6 to 7C9 " pos[1]=XXXXX001b io 07C6h-07C9h choice " BC6 to BC9 " pos[1]=XXXXX010b io 0BC6h-0BC9h choice " FC6 to FC9 " pos[1]=XXXXX011b io 0FC6h-0FC9h choice " 13C6 to 13C9 " pos[1]=XXXXX100b io 013C6h-013C9h choice " 17C6 to 17C9 " pos[1]=XXXXX101b io 017C6h-017C9h choice " 1BC6 to 1BC9 " pos[1]=XXXXX110b io 01BC6h-01BC9h choice " 1FC6 to 1FC9 " pos[1]=XXXXX111b io 01FC6h-01FC9h Help "Determines the range of i/o addresses used by the color palette. If mapped to 3C6-3C9, the color palette shadows the VGA color palette." NamedItem Prompt "Interrupt Level" choice " Channel 9 " pos[0]=1000XXXXb INT 9 choice " Channel 10 " pos[0]=0001XXXXb INT 10 choice " Channel 11 " pos[0]=0100XXXXb INT 11 choice " Channel 12 " pos[0]=0010XXXXb INT 12 Help "Determines the interrupt level used by ." NamedItem Prompt "Pixel Clock Frequency" choice " 50 Mhz " pos[0]=XXXXX01Xb choice " 64 Mhz " pos[0]=XXXXX00Xb choice " 36 Mhz " pos[0]=XXXXX10Xb Help "Determines the pixel clock frequency and therefore the display resolution. 64 Mhz provides 1024 x 768 resolution, 38 Mhz provides 800 x 600 resolution." NamedItem Prompt "Bus Arbitration Level" choice "Level 7" pos[3]=1X0X0111b ARB 7 choice "Level 3" pos[3]=1X0X0011b ARB 3 choice "Level 1" pos[3]=1X0X0001b ARB 1 choice "Level 5" pos[3]=1X0X0101b ARB 5 Help "Determines the bus arbitration level for the 34010 bus master." NamedItem Prompt "Horizontal Sync Polarity" choice " Negative " pos[0]=XXXX0XXXb choice " Positive " pos[0]=XXXX1XXXb Help "Sets the horizontal composite sync polarity for high resolution graphics modes."