6585 (PC 300) System Board
1 Modem Ring Detect jumper
2 Diskette Drive Write Protect jumper (WP)
3 Diskette Drive Connector
4 Hard Disk Drive Connector
5 On/Off Switch Power Supply Connector (J38)
6 On/Off Switch Connector (J37)
7 Power Supply Connectors
Power Connector (Voltages)
8 Processor Socket
9 Memory Connector (Bank 1)
10 Memory Connector (Bank 2)
11 Video Memory Modules
12 Power-On Password jumper (PWD)
13 Battery
14 Display Connector
15 Parallel Connector
16 Serial Connector
17 Serial Connector
18 Keyboard Connector
19 Mouse Connector
20 Riser Connector
Jumper Settings
These are the recommended combinations of memory-module kits. Each
Please see the LEGAL - Trademark notice.
Jumper
Setting
Description
MRD
2-3 (D)
Modem answer on ring
MRD
1-2
Modem no answer on ring
WP
2-3 (D)
Enable writing to diskette
WP
1-2
Disable writing to diskette
PWD
1-2 (D)
Password enabled
PWD
2-3
Password reset
bank must contain a matched pair of SIMMs having the same size and speed.
See Memory Matrix
Total
MemoryBank 1
Memory 1/2Bank 2
Memory 3/4
8 MB
4 MB
-
16 MB
4 MB
4 MB
16 MB
8 MB
-
24 MB
8 MB
4 MB
32 MB
8 MB
8 MB
32 MB
16 MB
-
40 MB
16 MB
4 MB
48 MB
16 MB
8 MB
64 MB
16 MB
16 MB
64 MB
32 MB
-
72 MB
32 MB
4 MB
80 MB
32 MB
8 MB
96 MB
32 MB
16 MB
128 MB
32 MB
32 MB
Back to
Feel free - send a for any BUG on this page found - Thank you.