Beep Symptoms (QAPlus/PRO)

  Beep Symptoms (QAPlus/PRO)
Beeps symptoms are short tones or a series of short tones separated by pauses (intervals without sound). (X can be any number.)

Examples: 

Beeps    Description
4    Four continuous beeps
1-2-X    ° One beep
     ° A pause (or break)
     ° Two beeps
     ° A pause (or break)
     ° Any number of beeps

Beeps/Symptom    FRU/Action
4 1. Video Adapter
  2. System Board
1-1-3 1. Run Setup
   CMOS read/write error 2. System Board
1-1-4 1. System Board
   ROM-BIOS check error  
1-2-X 1. System Board
   DMA error  
1-3-1 1. System Board
   RAM refresh verification error  
1-3-X 1. Memory Module
   (not listed above) 2. System Board
   The first 64KB RAM module failed.  
1-4-X 1. Memory Module
   An error was detected in 2. System Board
   the first 64KB of RAM failed.  
2-1-X 1. Memory Module
   The first 64KB of RAM failed. 2. System Board
2-2-X 1. Memory Module
   The first 64KB of RAM failed. 2. System Board
2-3-X 1. Memory Module
   The first 64KB of RAM failed. 2. System Board
2-4-X 1. Memory Module
   The first 64KB of RAM failed. 2. System Board
3-1-X 1. System Board
   The DMA register failed.  
3-2-4 1. System Board
   The keyboard controller failed. 2. Keyboard
3-3-4 1. Video Adapter
   Screen initialization failed. 2. System Board
  3. Display
3-4-1 1. Video Adapter
   the screen retrace test 2. System Board
   detected an error. 3. Display
3-4-2 1. Video Adapter
   POST is searching for video ROM 2. System Board


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.