60xx PowerPC



Type 60xx PowerPC Computers (6015, 6050 and 6070)

The following procedure clears the CMOS, Password, BOOT Sequence and other configuration data. After performing this procedure the computer will have to be reconfigured to its original settings.
  1.  Power Off the computer
  2.  Disconnect the AC power cord from the wall outlet
  3.  Remove the battery for at least 30 seconds
  4.  Reinstall the battery
  5.  Connect the AC power cord and turn on the system


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.