Updating the Device Driver for a DOS Network Server

Updating the Device Driver for a DOS Network Server

If you are using the DVD-ROM drive in a DOS Network server, you need to make the following changes:

1.  Add the /S parameter to the MSCDEX line in the AUTOEXEC.BAT file.
2.  Verify that the MSCDEX line is located after the line that loads the network services (NET START for IBM PC LAN program).
3.  Do one of the following, depending on the operating system:

    If you are using DOS 3.3, be sure that you have PC Local Area Network
    (LAN) Program Corrective Service Diskette level IP00755 or later installed.

    If you are using DOS 4.0, be sure that you have DOS Corrective Service
    Diskette level UR 29015 or later installed. (The computer cannot be configured
    as an Extended Services Domain Controller for the IBM PC LAN Program.)