Power-On Password (2615)

  Power-On Password

To override a password , do the following.
  1.  Power-off the computer.
  2.  Remove the access panel.
  3.  Remove the battery pack.
  4.  Remove the top assembly (do not disconnect any cables).
  5.  Connect a jumper to the two pads (R39) at the side of  the math coprocessor socket.
  6.  Reinstall the battery pack.
  7.  Power-on the computer. Keep the computer on until the LEDs blink and  the system locks.
  8.  Remove the jumper.
  9.  Press and hold the reset switch, then power-on  the computer.
  10.  Power-off the computer.
  11.  Replace the top assembly and the access panel.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.