+---+
|001|
+---+
- Power-off (O) the computer and wait 10 seconds.
- Reseat the memory module.
- Insert the Advanced Diagnostics diskette into the diskette drive.
- Power-on (I) the computer.
- Make a note of any error code you receive.
DID YOU RECEIVE A 20X XXXXXXXX XXXXXXXX OR
02XX POST ERROR OR FAILURE SYMPTOM ?
+---+
Yes No-+002| Go to Step 006.
| +---+
+-+-+
|003|
+---+
IS A MEMORY MODULE INSTALLED ?
+---+
Yes No-+004| Replace the system board
| +---+ Press Fn and F1 to set
+-+-+ the time and date to remove the 16X errors.
|005|
+---+
Replace the memory module kit.
If the error remains, replace the system board. Press Fn
and F1 to set the time and date and remove the 16X errors.
------------------------------------------------------------------------
+---+
|006|
+---+
- If you need to bypass an error, press Esc or F1.
- If you cannot continue, you might have a keyboard
problem, go to 'Symptom-to-FRU Index'.
DID THE ADVANCED DIAGNOSTICS MENU APPEAR ?
+---+
Yes No-+007| You may have a diskette drive problem, go to
| +---+ 'Symptom-to-FRU Index'.
+-+-+
|008|
+---+
- Press 0 (SYSTEM CHECKOUT), then press Enter.
- Follow the screen instructions.
NOTE: Ignore a 199 error.
- Press 0 (RUN TESTS ONE TIME), then press Enter.
- Press 2 (MEMORY), then press Enter.
DID YOU RECEIVE A 2XX ERROR OR FAILURE SYMPTOM ?
+---+
Yes No-+009| Go to Step 011.
| +---+
+-+-+
|010|
+---+
Go to Step 003.
-----------------------------------------------------------------------
+---+
|011|
+---+
DID THE SYSTEM CHECKOUT MENU APPEAR AT THE END OF TEST ?
+---+
Yes No-+012| You may have a power source problem, go to
| +---+ 'Power Systems Checkout'.
+-+-+
|013|
+---+
The Advanced Diagnostics tests finished without detecting
a failure. If you suspect an intermittent problem, start an
error log. If you need instructions, go to 'Error Log'.
-----------------------------------------------------------------------
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.