Error Log (2604)
Use the following steps to create an
error log, run the diagnostic tests, and
automatically record any error messages in an error log.
This procedure is normally used to diagnose an intermittent problem.
The errors must be logged to a diskette drive or to a printer.
If recording errors on a diskette, use a copy of
the Advanced Diagnostics diskette that is not write-protected.
Do not run any diskette tests
when logging to a diskette drive.
Do not run a parallel port test when logging to a printer.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.