System Board Diagnostics



System Board Diagnostics

To run the system board diagnostics, the system should first be booted from the reference diskette. Then, select either option 5, Test the computer or press Ctrl+A to bring up the test menu options in customer or advanced diagnostic mode respectively. To run the system board diagnostic select option 1 from this menu and insert the system board diagnostic diskette when prompted. For additional information see 'Diagnostics and Test Information (Models MZ0, MZV, MZS, MZE, MZL)'

The following is the step by step procedure for running the diagnostic diskette to test the system board. This procedure can also be used with the Module Tests option from the Diagnostics Menu.
  1.  Boot the Reference Diskette.
  2.  From the Main Menu, select option 5, Test Computer.
  3.  From the Test the Computer menu, select option 1 System  Board Diagnostics.
  4.  Remove the Reference Diskette and insert the QAPlus/PRO Diagnostics  Diskette.
  5.  Follow prompts. (Initialization takes approximately 4 minutes.)
  6.  At the QAPlus/PRO Main Menu, select Diagnostics.
  7.  Select Quick Check.
  8.  At the System Board Group, look for LUN 1 of 2 or LUN 2 of 2. This  indicates which CPU the diagnostics are actually testing. Use the + and - keys to change the CPU  selected. (The LUN message is at the top right of the display.)
  9.  Use the Spacebar and Cursor keys to select or  de-select groups.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.