Obtaining Drive Status



Obtaining Drive Status

To see the ID, capacity, and other information about each of the hard disk drives attached to the RAID adapter:
  1.  Start the RAID configuration program by inserting the  IBM RAID option diskette into the primary diskette drive  and turning on the system.

     If the system already is turned on, press Ctrl+Alt+Del

  2.  Select Start RAID Configuration Program  from the PC DOS start-up menu, then press Enter.
  3.  Select Drive information from the Main Menu.
     See also 'Starting the RAID Configuration Program'

     

  4.  Use the Up Arrow (  )  key or the Down Arrow (  ) key to highlight each of the drives  shown in the Bay/Array selection list.  As a drive is highlighted, the information  for that drive appears at the bottom of the screen.
  5.  Press Esc to return to the Main Menu.


NOTE: The status of the hard disk drive determines the status of the logical drives in the array in which the hard disk is grouped.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.