The requirements for terminating external SCSI devices are:
- If you attach both internal and external SCSI devices, you must
terminate the last internal device and the last external device.
For non-disk-array models,
you must also change the termination setting
of the SCSI-2 adapter in the SCSISelect
utility program, as described in 'SCSISelect Utility Program',
so that the SCSI-2 adapter is no longer terminated.
- If you attach only external devices to the SCSI-2 adapter,
you must terminate the last device on the cable.
If you install only one external device, it must be terminated.
Since the SCSI-2 adapter is already terminated, do not
change the termination setting.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.