Testing the Adapter with a Responder on the Network



  Testing the Adapter with a Responder on the Network


The Ethernet Configuration and Drivers program can test the network more thoroughly if you have a responder on the network while running the tests.
  1.  Locate another workstation on the network with an Ethernet adapter installed.
  2.  Run the Ethernet Configuration and Drivers program for the adapter and set up  the adapter as a responder.
  3.  Return to the server you want to test.  Start the Ethernet Configuration and Drivers program and test the adapter.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.