Power-On Password (2136/2137 SL-A)

  Power-On Password

  1.  Power-off the system unit.
  2.  Unplug the power cable from the electrical outlet.

      Do not attempt these steps with the power cord plugged  into the electrical outlet. The power supply maintains +5Vdc of standby power when only the  power switch is powered off. System damage might result if the power cord is not unplugged.

  3.  Plug the power cable, turn on the system, depress F1 while POST to enter BIOS Setup menu.
  4.  Select Advanced Options, then enter Security Options and set Power-on Password setting to NONE to clear password
  5.  Save then exit from BIOS Setup.
  6.  Unplug the power cable from the electrical outlet.

NOTE: To reinstall the password, the user must enter a password in the Setup Utility.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.