Installing the SNMP Agent in Windows NT

Installing the SNMP Agent in Windows NT

Use this procedure to install the SNMP Agent after the UMA program has been installed.
This procedure is not required if the SNMP Agent was installed as part of the UMA program installation.

1.  From the Windows Desktop, click on Start, select Settings, and then click on Control Panel.
2.  Double click on the Network icon.
3.  Click on Services, and then click on SNMP.
4.  Click on Add.
5.  Click on SNMP Service, and then click on OK.
6.  If you are prompted for the location of the Windows NT files, insert your Windows NT CD, type X:\i386
    (where x is your CD-ROM drive letter), and then click on Continue. The SNMP Properties window appears.
7.  Click on the Agent tab. Type any optional Contact and Location information required for this computer.
8.  Verify that Application is selected.
9.  Click on the Traps tab.
10.  In the Community Name field, type public, and then click on Add.
11.  In the Trap Destinations field, click on Add.
12.  Type the IP address of the computer that will receive the SNMP traps
     (for example, a Microsoft SMS server or a Tivoli NetView console), and then click on Add.
13.  Repeat steps 11 and 12 to add more trap destinations, if required.
14.  Click on OK.
15.  Click on Close to complete the network setup, and then restart your computer.