Hardware Interfaces (Aptiva 2165 - SL-A)


Hardware Interfaces

The following peripheral interfaces for adapters, options, and drives are supported in the system unit.
System Board Hardware Interfaces 

Item Interface
Expansion slot
for I/O adapter
cards
Three PCI (peripheral component interconnect) v2.1
compatible expansion slots that operates at 33 MHz
bus speed .PCI slot1 can hold a short(175mm) PCI
adapter card. PCI slot2 can hold a PCI adapter card
measuring 165 mm in length (or less). PCI slot3 can
hold a PCI adapter card measuring 236 mm in
length(or less).
Hard Disk Drives Two PCI local bus Enhanced IDE v1.0 compatible hard
disk drive interfaces that support PIO mode up to mode
4, DMA 32-bit access up to mode 2 and Ultra 33
Synchronous DMA up to mode 2 (33M bytes/sec).
CD/DVD-ROM Drive 5.25-in. high-performance, forty speed (40X) CD-ROM
IDE/AT drive
Support Bootable CD-ROM Format specification
version 1.0.
Compliant to Audio-CD, Video-CD, CD-ROM/XA,
Karaoke-CD, and Photo-CD (both single and multi-
session) format.
Diskette Drive AT diskette interface
Video Physical interface is compatible with the IBM Personal
System/2 (PS/2) VGA interface.
SiS530 VGA on board.
Modem One 56.6 Kbps PCI plug and play modem adapter card
with data/fax features.
Audio ESS 1938 Audio Controller is compatible with Sound
Blaster (Creative Labs, Inc.) and with Codec function
embedded.
Pointing device IBM PS/2-compatible mouse
Keyboard device IBM PS/2-compatible keyboard
Serial port 9-pin connector with RS232D electrical interface
Parallel port Supports SPP (IBM PC/AT, PS/2) compatible, EPP
(IEEE 1284 compliance), ECP (IEEE 1284 compliance)
interface.
Game port Game port interface for joystick.
It also supports MIDI.
Ethernet Port Some models have the 10/100 Mbps autosense
Ethernet function built on board
USB USB controller integrated in SiS530.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.