Adapter Cards (Aptiva 2165, 2190 - SL-A)

Adapter Cards

Installing Adapter Cards 

•  Remove the screw that secures the adapter card slot cover. Then remove the slot cover.
•  Align and insert the adapter card into the adapter card connector.
•  Secure the card with the card retainer and screw that you removed in the first step.
•  Reinstall all hardware and screws that you removed prior to the Installation of the adapter card.

•  Position the system unit so that the card is accessible to you.
•  If the adapter card has cables, disconnect them. Be sure to take note of where the Cable are connected.
   You will have to reconnect these cables when you reinstall the card.
•  Remove the adapter card screw
•  Firmly hold the adapter card and carefully pull it from the card connector.
•  If you are not reinstalling the card, reinstall all hardware and screws that were removed prior  to the removal of the adapter card.