Bay 4, 5 (3.5-Inch Diskette Drives) - (Aptiva 2172, 2174 - SL-A)

Bay 4, 5 (3.5-In. Diskette Drives)

•  Disconnect the cables (note location of cables).
•  Press the lever and rotate outward.
•  Pull carefully and slowly as soon as the warning arrow appears.
•  The drive frame becomes free after the line behind the arrow appears.
   Remove the frame from the chassis.

•  Align the front notch of the drive frame with the system chassis
•  Align the top rail of the drive frame with the system chassis and swing inward until it "clicks" to lock.
   
  
•  Re-attach the power and signal cables to the drives.