Product Overview (Aptiva 2174 - SL-A)
Product Overview - Aptiva 2174 - SL-A
Machine Type 2174 has five PCI slots and supports the
AMD-K7 processor family with slot A processor package type.
The machine type 2174 supports Accelerated Graphics Port (AGP)2X, which allows
installed system memory to be used as texture memory, yielding a huge texture footprint
to enhance 3D graphical display performance.
Listed below are 2174 system features:
Processors
- Slot A connector.
- Detachable CPU fansink.
- 128K of on-chip level one (L1) cache.
- 512K level two (L2) cache support and 1MB SRAM at multiple frequencies.
- One of the following processors can be installed:
- AMD-K7 processor, 200MHz front side bus, 550MHz internal, with 3DNow technology
- AMD-K7 processor, 200MHz front side bus, 600MHz internal, with 3DNow technology
Memory
- 512KB Pipeline Burst Static RAM (PBSRAM). Built in AMD-K7 processor.
- 8MB, 16MB, or 32MB video Synchronous DRAM (SDRAM) built in AGP video adapter card.
- 168-pin Synchronous Dynamic Random Access Memory (SDRAM), Dual-in-line Memory Module (DIMM) sockets.
- Three memory sockets.
- 32MB, 64MB, 128MB or 256MB DIMM.
- PC-100 (16-128 Mbit, ECC, 200MHz, 3.3volt) DIMMs with gold contacts
- Maximum memory is 768 MB.
External Ports
- Video port (15-pin D-sub connector) (Video adapter card available)
- P&D-D (Plug and Display Digital) Video port (30 pin D-sub connector) (Video adapter card available)
- Parallel port (25-pin D-sub connector)
- Two Serial ports (9-pin D-sub connector), serial port 2 reserved.
- Keyboard port (6-pin PS/2 mini-din connector)
- Mouse port (6-pin PS/2 mini-din connector)
- Three USB ports.
- Game/MIDI port (15-pin D-sub connector) (Audio adapter card available)
- Microphone-in jack (Audio adapter card available)
- Speaker-out jack (Audio adapter card available)
- Line-in jack (Audio adapter card available)
- Telephone line-out connector (Modem adapter card available)
- Telephone line-in connector (Modem adapter card available)
- RJ-45 connector (LAN adapter card available)
Diskette Drive
- AT-type
- 3.5" 1.44 MB slimline diskette drive.
Hard Disk Drive
- 3.5", 1" height IDE AT drive. (3.5" may be in acoustic mounting bracket) 7200rpm
- 128 KB 'look-ahead' cache memory in hard disk drive.
- Average and minimum 12 ms seek time, access time varies for the hard disk
drive and the hard disk drive manufacturer.
DVD-ROM Drive
- 5.25" high performance, 8x/40x DVD-ROM IDE/AT drive.
- Read data and play audio from standard and mini DVD-ROM and audio compact discs (audio CDs).
Multimedia
- A pair of external active speakers with a power adapter or a pair of passive speakers.
- Noise canceling microphone available.
Power Management
- ACPI 1.0/PC99/OnNow compliant motherboard and BIOS.
- SMM, VESA monitor specification compliant.
- APM 1.2 support with password restart option.
- Software shutdown by Windows 98.
- Power-on Switch supports Soft-Off and Full-Off.
- Touch for 1 second or less to put system on Suspend state.
- Touch and hold for 4 seconds to put system on Full-Off-state (Power Supply 5V standby remained).
- System enters standby mode if any of following conditions are met:
- Execute standby from Windows 98 Start menu
- Press system power button if it sets to act as standby function.
- System is idle and the standby timer set in the Windows 98 Power Management Property elapses.
Power Supply
- PC-98 compatible 200W ATX power supply
- Searchable high/low voltage selection
Internal Cabling
- Two 40-pin ribbon cables for hard disk drive and CD/DVD-ROM drive.
- One 34-pin ribbon cable for AT diskette drive.
- One 4-pin (2-wire) cable for hard disk drive light-emitting diode (LED).
- One 3-pin (3-wire) cable for power light-emitting diode (LED).
- One 2-pin (2-wire) cable for power switch.
- One 4-pin modem voice-in/speaker-out cable.
- 56.6 Kbps PCI modem adapter card with data/fax/voice or non-voice features.
Monitor (Not included with some models)
- Super Video Graphics Array (SVGA) monitor.
- VESA power saving mode compliant.
- Connector for a detachable grounded 3-wire power cord
- 1.8-m (5.8-ft.) signal cable attached
- Auto-sensing power input for 100 Vac to 240 Vac
- 15" (13.7" viewable image size) monitor
- 0.28-mm dot pitch
- Automatic scanning horizontal frequencies from 30 KHz to 54 KHz or 30 KHz to 69 KHz (for Japan)
- Vertical frequencies between 50 Hz and 120 Hz.
- DDC2A/B or DDC1/2B+ support (for Japan)
- OSD (On-Screen Display) menu (for Japan)
- 17" (15.7" viewable image size) monitor
- 0.28-mm or 0.27-mm dot pitch (for Japan)
- Automatic scanning horizontal frequencies from 30 KHz to 69 KHz or 30 KHz to 72 KHz (for Japan)
- Vertical frequencies between 50 Hz and 120 Hz.
- DDC1/2B+ support and OSD (On-Screen Display) menu.
Keyboard
- 104-key rubber dome Rapid Access II keyboard with 1.8-m (5.8-ft.) cable
Mouse
- 4 Button PS/2 Sleek or ScrollPoint mouse with 1.8-m (5.8-ft.) cable
Back to
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.