BIOS Error Beeps (Aptiva 2174 - SL-A)

BIOS Error Beeps (Aptiva 2174 - SL-A)

Note: To diagnose a problem, first find the BIOS POST error beeps in left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause.

Beeps	Error	Action/FRU
1	Refresh Failure	See Flash (BIOS) Update Procedure System board
2	Parity Error	Insert the memory modules in the DIMM sockets properly, then reboot the system. Memory module. See the Step 005 of Memory to replace memory module. System board
3	Base 64 MB Memory Failure	Insert the memory modules in the DIMM sockets properly, then reboot the system. Memory module. See the Step 005 of Memory to replace memory module. System board
4	Time not operational	Check CPU speed and system board DIP switches System battery
5	Process Error	CPU System board
6	8042-Gate A20 Failure	See BIOS Setup Utility
7	Processor Exception Interrupt Error	CPU System board
8	Display Memory Read/ Write Error	Insert the memory modules in the DIMM sockets properly, then reboot the system. Memory module. See the Step 005 of Memory to replace memory module. Video adapter card System board
9	ROM Checksum Error	Enter BIOS Setup and load the default setting. CMOS battery System board
10	CMOS shutdown Register Read/Write Error	Enter BIOS Setup and load the default setting. CMOS battery System board
11	Cache Memory Bad Do not Enable Cache	CPU System board Note: Do not press <Ctrl><Alt><Shift><+> to enable cache.