LS-120 Drive

LS-120 Drive Rear Panel Connectors and Jumpers

Note: Set the jumpers located on the LS-120 drive according to your system configuration. If you have two drives on a single IDE cable, make sure you set one of them as Master and the other as Slave.

Abbreviation Jumper Name Function MA Master Configures the LS-120 drive as the Master drive on the secondary IDE channel. SL Slave Configures the LS-120 drive as the Slave drive on either the primary or secondary IDE channel. CS Cable Select This setting is only for computers that use cable-select cable. MDO Factory Setting For factory use ONLY. Do not use this setting.

Abbreviation	Jumper Name	Function
MA	Master	Configures the LS-120 drive as the Master drive on the secondary IDE channel.
SL	Slave	Configures the LS-120 drive as the Slave drive on either the primary or secondary IDE channel.
CS	Cable Select	This setting is only for computers that use cable-select cable.
MDO	Factory Setting	For factory use ONLY. Do not use this setting.

LS-120 Drive Jumper Settings

Please see the LEGAL - Trademark notice.
Feel free - send a

for any BUG on this page found - Thank you.