Adapter Cards

Adapter Cards

Installing Adapter Cards

•  Remove the screw that secures the adapter card retainer and slot cover. Then remove the card retainer and slot cover.
•  Align and insert the adapter card into the adapter card connector.
•  Secure the card with the screw that you removed in the first step.
•  Reinstall all hardware (except for the slot cover, which cannot be  reinstalled) and screws that you removed prior to the installation of the  adapter card.

•  Position the system unit so that the card is accessible to you.
•  If the adapter card has cables, disconnect them. Be sure to take note  of where the cable are connected. You will have to reconnect these  cables when you reinstall the card.
•  Remove the adapter card screw
•  Firmly hold the adapter card and carefully pull it from the card connector.
•  If you are not reinstalling the card, reinstall all other hardware and screws  that were removed prior to the removal of the adapter card.