NEW MICROCODE FOR SOME 68PIN 9.1GB AND 18.2GB HARD DRIVES

Subject: NEW MICROCODE FOR SOME 68PIN 9.1GB AND 18.2GB HARD DRIVES
Updated Netfinity server RETAIN Tip: 

    Record number:       H167295
    Device:              D/T8680
    Model:               M
    Hit count:           UHC00025
    Success count:       USC0000
    Publication code:    PC50
    Tip key:             024
    Date created:        O99/09/21
    Date last altered:   A99/11/30
    Owning B.U.:         USA


Abstract: NEW MICROCODE FOR SOME 68PIN 9.1GB AND 18.2GB HARD DRIVES

TEXT:

New microcode is now available for some 68pin 9.1GB and 18.2GB Hard Disk Drives.

ABSTRACT:

New microcode improves "robustness" of specific Hard Disk Drive's Internal Diagnostics.

ISOLATION AIDS:

•  Any system configured with any of the following Hard Disk Drives (HDDs):
•  IBM 9.1GB Wide Ultra SCSI SL Hot-Swap HDD,
   Option p/n02K0477, FRU p/n36L8648.
•  IBM 18.2GB Wide Ultra SCSI Hot-Swap HDD,
   Option p/n02K0478, FRU p/n59H6996.
•  IBM 18.2GB Wide Ultra SCSI Hot-Swap HDD,
   Option p/n02K0478, FRU p/n36L8649.

FIX:

Apply the IBM Drive Update Program to the HDD(s) by flashing with new microcode.

The four (4) IBM Drive Update Program image files are available from the following URL:

http://www.pc.ibm.com/searchfiles.html
search on "IBM Drive Update Program"

The corresponding text files are viewable online and may be printed.

Note: When the program is started, it may find other hard files in the system that it can upgrade.
It is recommended that these also be upgraded.

To create the update diskettes; downloaded the four (4) ".exe" files listed after searching on IBM Drive Update Program.
These files are self-extracting executable files that will prompt for diskettes.
Follow instructions on the display to create the diskettes.

DETAILS:

Hard Disk Drives periodically perform internal diagnostics.
The 4F flash level and/or SAB0 Flash level and higher code improves the robustness of the drive's internal diagnostics, eliminating potential false diagnostic failure.

In addition to the elimination of the false diagnostic failures,

•  All firmware upgrade versions enhance the error recovery robustness of the firmware.
•  Firmware version 4F made improvements to PFA functions, fixes a communication problem between  the drive and controller if the drive is power cycled independently of the controller, and fixes  a rare problem in a multi-initiator environment and enhancements to logging features.
•  Firmware upgrade SAB0 fixes a problem in a multi-initiator environment and enhancements to logging  features.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.