Subject: 7000-M10: CTL-ALT-DEL WILL NOT RESET HOTPLUG FUNCTION
New Netfinity server RETAIN Tip:
Record number: H062919
Device: D/T8680
Model: M
Hit count: UHC00000
Success count: USC0000
Publication code: PC50
Tip key:
Date created: O99/11/05
Date last altered: A99/11/09
Owning B.U.: USA
Abstract: 7000-M10: CTL-ALT-DEL WILL NOT RESET HOTPLUG FUNCTION
SYMPTOM:
Hotplug function will not be enabled on a disabled slot when system is re-booted using Ctl-Alt-Del keys.
PROBLEM ISOLATION AIDS:
FIX:
Use the power on/off button or the reset button on front panel of system to reboot,
if required OR follow instructions in the
'IBM PCI Hot Plug Services and Fault Tolerant Management Interface for Windows NT 4.0 User Guide, Third Edition'..
WORKAROUND:
Do a cold boot or use Hotplug Guide when adding adapters.
DETAILS:
Ctrl-Alt-Del does not support the hotplug reset function.
It is required that you follow the "Hotplug Services Guide" or do a cold boot by pressing either the power on/off button or
reset button on front panel of system.
This will allow for the system hotplug functions (hardware and software) to be active.
Note: Ensure that PCI power switch is on at adapter slot.
The referenced User Guide (in .PDF format) is available from the following URL:
http://www.pc.ibm.com/searchfiles.html
search on "hot plug pdf"
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.