Infrared Related Symptoms (2640)

Infrared Related Symptoms
Symptom/Error    FRU / Action in Sequence
   Unable to communicate using 1. Make sure the setup for the IR is correct
   the Infrared (IR) Port. 2. Make sure there are no fluorescent lights
      near the computer. The computer may receive
      optical noise from the fluorescent light.
  3. Run the advanced diagnostic test. If an
      error occurs and a FRU code is displayed,
      replace the parts by the FRU code.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.