Running the Diagnostics (TP 240 - 2609)


Running the Diagnostics

Use either the TrackPoint or the cursor move keys to interact with the tests.

  1.  Connect the external floppy disk drive to the computer.
  2.  Insert the PC Doctor Startup disk into the FDD.
  3.  Power-on the computer.
  4.  From the PC DOS 7.0 Startup Menu, select 2. CONFIG for TP-240 Audio Test to run the audio test.
  5.  After the audio test, you will be prompted to insert the PC Doctor for DOS Disk 2.
     Follow the instructions on the screen and proceed to the main menu.
  6.  At the main menu, select the test to run.
  7.  Press Enter to run the test selected.
  8.  After starting a test, do not press any key until prompted, then follow the instructions on the screen.
  9.  When the test is completed, press Esc to return to the main menu.
  10.  Select Quit/Exit Diags to exit the diagnostics utility.


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.