IBM PCI ServeRAID / II / 3H / 3L

IBM PCI ServeRAID / II / 3H / 3L - Adapter

ServeRAID - Adapters and Controllers

See > IBM ServeRAID xx - Adapter Compatibility

IBM PCI ServeRAID II Adapter

For enable Download via Bootlock (J11) see > H163474

See Tip > ServeRAID: Recovery Procedures for DDD Drives

Part FRU P/N OPT P/N ----------------------------------------------------------- ServeRAID II Ultra SCSI PCI-Adapter 76H3587 76H3584 Third Channel Cable 01K6501 76H5400 DASD Status Cable 01K6496 76H5399 8 MB / NVRAM Battery-Backup Option 21H8973 76H5401 VHDCI .8mm to 68-pin SCSI Adapter 01K6497 01K8017 ----------------------------------------------------------- External 1m .8mm (VHDCI) Cable 01K6498 76H3589 External 2m .8mm (VHDCI) Cable 01K6502 01K8027 External 3m .8mm (VHDCI) Cable 01K6503 01K8028 External 4.3m .8mm (VHDCI) Cable 01K6484 01K8029

IBM PCI ServeRAID-3H (Ultra2 SCSI) Adapter

ServeRAID - Adapters and Controllers

J6 Download Jumper Locations

J6 consists of 4 pins that accept 2 jumper blocks.
Install jumper blocks in either of the positions shown below (with respect to the card layout) to enable Download via Bootblock
Note: This procedure is only needed if a download by code block does not work.
By default there is no jumper on J6 installed.

Part FRU P/N OPT P/N ----------------------------------------------------------- ServeRAID-3H SCSI PCI-Adapter 01K7396 01K7207 ServeRAID-3HB SCSI PCI-Adapter 01K7396 37L6086 Third Channel Cable 01K7249 DASD Status Cable 03K9356 Cache 09L2105 32 MB / NVRAM Battery-Backup Option 21H8979 28L1003

IBM PCI ServeRAID-3L Adapter

ServeRAID - Adapters and Controllers

Part FRU P/N OPT P/N ----------------------------------------------------------- ServeRAID-3L SCSI PCI-Adapter (01K7207) 01K7352 01K7364 DASD Status Cable 03K9356

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.