AdapterId 06321h AdapterName " The MicroPort 2 " NumBytes 1 NamedItem Prompt "Interrupt configuration" choice "Interrupt 3" pos[0]=000XXXXXb int 3 choice "Interrupt 4" pos[0]=001XXXXXb int 4 choice "Interrupt 5" pos[0]=010XXXXXb int 5 choice "Interrupt 7" pos[0]=011XXXXXb int 7 choice "Interrupt 9" pos[0]=100XXXXXb int 9 Help "The Micro Port 2 provides to select different interrupt lines. To change assignments, use the F5=Previous and F6=Next keys. If a configuration assignment conflicts with another assignment, an asterisk (*) and the word conflicts appears. You must change the assignment to resolve the conflict. Use the F10=Save key to save the displayed configuration to battery-powered memory." NamedItem Prompt "I/O address configuration" choice " 2F8H and 3220H" pos[0]=XXX0000Xb io 2f8h-2ffh 3220h-3227h choice " 3E8H and 2E8H" pos[0]=XXX0001Xb io 3e8h-3efh 2e8h-2efh choice " 280H and 288H" pos[0]=XXX0010Xb io 280h-287h 288h-28fh choice " 290H and 298H" pos[0]=XXX0011Xb io 290h-297h 298h-29fh choice " 6A0H and 6A8H" pos[0]=XXX0100Xb io 6a0h-6a7h 6a8h-6afh choice " 7E8H and 6E8H" pos[0]=XXX0101Xb io 7e8h-7efh 6e8h-6efh choice " 680H and 688H" pos[0]=XXX0110Xb io 680h-687h 688h-68fh choice " 690H and 698H" pos[0]=XXX0111Xb io 690h-697h 698h-69fh choice "13E8H and 12E8H" pos[0]=XXX1000Xb io 13e8h-13efh 12e8h-12efh choice "1280H and 1288H" pos[0]=XXX1001Xb io 1280h-1287h 1288h-128fh choice "1290H and 1298H" pos[0]=XXX1010Xb io 1290h-1297h 1298h-129fh choice "16A0H and 16A8H" pos[0]=XXX1011Xb io 16a0h-16a7h 16a8h-16afh choice "17E8H and 16E8H" pos[0]=XXX1100Xb io 17e8h-17efh 16e8h-16efh choice "1680H and 1688H" pos[0]=XXX1101Xb io 1680h-1687h 1688h-168fh choice "1690H and 1698H" pos[0]=XXX1110Xb io 1690h-1697h 1698h-169fh choice "23E8H and 22E8H" pos[0]=XXX1111Xb io 23e8h-23efh 22e8h-22efh Help "Select the first I/O address combination(2F8H and 3220H) to use the serial ports as COM1 and COM2. All others can be used with software allowing to accommodate the I/O address. To change assignments, use the F5=Previous and F6=Next keys. If a configuration assignment conflicts with another assignment, an asterisk (*) and the word conflicts appears. You must change the assignment to resolve the conflict. Use the F10=Save key to save the displayed configuration to battery-powered memory."