AdapterId 0EFDFh AdapterName "ARCNET controller: ASTER/2 " NumBytes 1 NamedItem Prompt "Base Port and Mem Location, Int Level" choice "Port 2e0, Mem 0D000, Int 2" pos[0] = 0010000Xb io 02E0h - 02EFh int 2 mem 0D0000h - 0D7FFFh choice "Port 2e0, Mem 0D800, Int 2" pos[0] = 0011000Xb io 02E0h - 02EFh int 2 mem 0D8000h - 0DFFFFh choice "Port 2f0, Mem 0D000, Int 2" pos[0] = 0110000Xb io 02F0h - 02FFh int 2 mem 0D0000h - 0D7FFFh choice "Port 2f0, Mem 0D800, Int 2" pos[0] = 0111000Xb io 02F0h - 02FFh int 2 mem 0D8000h - 0DFFFFh choice "Port 300, Mem 0D000, Int 2" pos[0] = 1010000Xb io 0300h - 030Fh int 2 mem 0D0000h - 0D7FFFh choice "Port 300, Mem 0D800, Int 2" pos[0] = 1011000Xb io 0300h - 030Fh int 2 mem 0D8000h - 0DFFFFh choice "Port 2e0, Mem 0C000, Int 2" pos[0] = 0000000Xb io 02E0h - 02EFh int 2 mem 0C0000h - 0C7FFFh choice "Port 2e0, Mem 0C800, Int 2" pos[0] = 0001000Xb io 02E0h - 02EFh int 2 mem 0C8000h - 0CFFFFh choice "Port 2f0, Mem 0C000, Int 2" pos[0] = 0100000Xb io 02F0h - 02FFh int 2 mem 0C0000h - 0C7FFFh choice "Port 2f0, Mem 0C800, Int 2" pos[0] = 0101000Xb io 02F0h - 02FFh int 2 mem 0C8000h - 0CFFFFh choice "Port 300, Mem 0C000, Int 2" pos[0] = 1000000Xb io 0300h - 030Fh int 2 mem 0C0000h - 0C7FFFh choice "Port 300, Mem 0C800, Int 2" pos[0] = 1001000Xb io 0300h - 030Fh int 2 mem 0C8000h - 0CFFFFh choice "Port 2e0, Mem 0D000, Int 3" pos[0] = 0010001Xb io 02E0h - 02EFh int 3 mem 0D0000h - 0D7FFFh choice "Port 2f0, Mem 0D000, Int 3" pos[0] = 0110001Xb io 02F0h - 02FFh int 3 mem 0D0000h - 0D7FFFh choice "Port 2e0, Mem 0D000, Int 4" pos[0] = 0010010Xb io 02E0h - 02EFh int 4 mem 0D0000h - 0D7FFFh choice "Port 2f0, Mem 0D000, Int 4" pos[0] = 0110010Xb io 02F0h - 02FFh int 4 mem 0D0000h - 0D7FFFh Help "To configure this adapter you may choose the base port address, base memory location, and interrupt level. The base port number is the first port address that is used. The base memory address is where the first addressable memory location is found. This is the shareable memory that is contained within the network controller. The interrupt levels are used to interrupt the host processor when data is recieved through the network. Use the F5=Previous and the F6=Next keys to change this assignment. Conflicting assignments are marked with an asterisk and must be changed."