BIOS REPORTS INCORRECT PROCESSOR SPEED

Subject: BIOS REPORTS INCORRECT PROCESSOR SPEED
Updated Netfinity server RETAIN Tip: 

    Record number:       H164724
    Device:              D/T8680
    Model:               M
    Hit count:           UHC00075
    Success count:       USC0000
    Publication code:    PC50
    Tip key:
    Date created:        O98/09/17
    Date last altered:   A99/10/05
    Owning B.U.:         USA


Abstract: BIOS REPORTS INCORRECT PROCESSOR SPEED

SYMPTOM:

BIOS displays a processor speed different from what is expected.

PROBLEM ISOLATION AIDS:

•  The system is a Netfinity 7000 M10 server, Type 8680, all models.
•  The system has a processor whose speed is different than what is reported by BIOS.

FIX:

Reference the white print on the Processor Board near the Processor Speed jumpers, or directions below.

•  400 MHz:

          Pins 1-2 on J44, J45 and J46.
          Pins 2-3 on J43.
   

•  450 MHz:

          Pins 1-2 on J44 and J46.
          Pins 2-3 on J43 and J45.
   

•  500 MHz:

          Pins 2-3 on J43 and J44.
          Pins 1-2 on J45 and J46.
   

•  550 MHz:

          Pins 2-3 on J43, J44 and J45.
          Pins 1-2 on J46.
   

DETAILS:

On page 146 of the "Hardware Information Book", the jumper settings for processor speeds are incorrect.
BIOS will display a processor speed different than from what is expected if the directions on page 146 are used to set the processor speed jumpers.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.