Changing RAID Levels
You can change (migrate) the RAID levels of currently defined logical drives. Depending upon the current RAID level, you might need to add or remove a hard disk drive before you can change the RAID level.
To use the Change RAID Level feature, all of the logical drives within the array must be the same RAID level.
The ServeRAID controller supports changing RAID levels as follows:
Change two RAID level 0 logical drives to RAID level 5 by adding one hard disk drive
Change two RAID level 1 logical drives to RAID level 5 by adding one hard disk drive
Change from RAID level 5 to RAID level 0 by removing one hard disk drive.
To change the RAID level:
A screen similar to the following appears.
Note: The affected logical drives appear based on the migrating option selected.
Note: If you are migrating to RAID level 0, the last drive defined in the array becomes RDY.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.