FRU Removals and Replacements (2615)



  FRU Removals and Replacements

Follow the numerical sequence in the FRU removal sequence list and in the exploded view to remove or disconnect parts in the correct order. The letters in parentheses in the list indicate screw types. See the 'Screw Sice Chart' to match the letters to the correct screw type and size before replacing each screw.

 

Safety 8
Safety 1
  1.  Battery Pack
  2.  Coprocessor Cover
  3.  Three Top Cover Screws (1-B, 2-TT)
      (At rear of keyboard)
  4.  Five Bottom Cover Screws (4-B, 1-UU)
      (One is inside battery compartment)
  5.  LCD Cable
  6.  LCD Ribbon Cable
  7.  LCD Assembly
  8.  One Keyboard Screw (D)
      (At front of keyboard)
  9.  Two Ribbon Cables
  10.  Keyboard Assembly
  11.  Four System Board Screws (D)
  12.  Two Threaded Hex Spacers
      (At rear of system board)
  13.  System Board
  14.  Three Hard Disk Drive Screws (D)
  15.  Hard Disk Drive and Mounting Brackets
      (Have customer backup all information before replacing drive. Do
      not replace the hard drive if the computer is operating or is in suspend
      mode. Restore drive system information using the customer's backup
      copy of the system programs.)
  16.  Diskette Drive Ribbon Cable
  17.  Diskette Drive
  18.  Backup Battery
  19.  Speaker
  20.  Five Threaded Spacers
  21.  Video/Power Board

Back to  Jump to TOP-of-PAGE