Hot-Swap Fan Replacement
The server comes with three hot-swap fans.
NOTE: You do not need to power-off the server to replace a hot-swap fan.
The following illustration shows the replacement of a hot-swap fan. Refer to this illustration while performing the steps in this procedure.
To ensure proper system cooling, the top cover should be removed for no more than 30 minutes during this procedure.
The power cable to the fan should be disconnected before you remove the fan assembly from the server, otherwise, the fan might start turning while you are holding it.
NOTE: If the fan rotor is very dusty, it might cause the fan to stop. Try cleaning the fan before you replace it with a new fan.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.